Emergency water damage help, 24 hours a day

Kirkland and the EastsideOpen 24/7/365(425) 592-3603

Crews on call now, 24 hours a day

Water Damage Inspection in Kirkland, WA: Same Day Moisture Mapping

After a leak, the big question is: how far did the water really go? Our water damage inspection answers it with measurements, not guesses. We use moisture meters and thermal imaging to build a moisture map of every affected wall, floor and ceiling, then give you a written report with photos and readings. Use it to plan repairs, support an insurance claim, or make a home purchase decision. Same day inspections are available across Kirkland, WA, and we answer 24 hours a day.

  • Moisture mapping
  • Thermal imaging
  • Written report
  • Same day inspections
Kitchen floor plan moisture map colored green, gold and burgundy around a leak
Measured, mapped
and documented
Who it is for

When a water damage inspection helps

After a leak

You cleaned up, but you are not sure the water is gone from walls and floors.

For an insurance claim

You need clear proof of what got wet, and how badly, for your adjuster.

Buying or selling

A stain, smell or old repair raises questions before closing.

Landlords and tenants

Both sides want a fair, neutral record of water damage in a rental.

Condo and HOA questions

Figuring out which unit, or which part of the building, the water came from.

A second opinion

Another company said everything is dry, or that everything must be torn out.

What you get

What is in our water damage inspection report

A clear report you can hand to a contractor, adjuster, buyer or board.

What is in our water damage inspection report
SectionWhat it shows
Moisture mapA floor plan marked with readings, showing exactly where materials are wet, damp or dry
Thermal imagesPictures of hidden moisture patterns behind walls and ceilings
PhotosVisible damage, stains, warping and the likely water source
Water category and classHow dirty the water was and how much material absorbed it
Likely sourceWhere the water most likely came from, and whether it is still active
Recommended next stepsWhat should be dried, cleaned, removed or simply watched

Need the source pinned down first? If the leak itself is still hidden, start with hidden leak detection. If you are worried about mold specifically, add mold testing.

How moisture mapping works

Seeing water you cannot see

Water moves sideways, downward and up into walls. A stain the size of a plate can sit on top of wet drywall several feet wide. Here is how we find the true edges.

Baseline readings

We first measure walls and floors in an area that never got wet. This tells us what "dry" means for your home's materials.

Grid readings

Then we take readings in a grid outward from the water source until we reach dry readings on every side. Each reading goes on the map.

Thermal confirmation

Thermal cameras show cool patterns where water is evaporating. We confirm every thermal clue with a meter, because temperature alone can mislead.

Inside walls and floors

For layered floors or cabinets, we may use probe meters through small, discreet holes to read moisture in the subfloor or wall cavity.

Your inspection

How a water damage inspection works

  1. Tell us the history

    What happened, when, and what has been done so far.

  2. Find the source

    We look at plumbing, appliances, roof and windows near the damage.

  3. Map the moisture

    Baseline, grid readings and thermal scans across every affected room.

  4. Photograph everything

    Stains, readings and thermal images, all labeled by location.

  5. Explain on the spot

    We walk you through what we found before we leave.

  6. Deliver the report

    A written report with the moisture map, photos and recommendations.

Kirkland inspections

Common inspection requests in Kirkland

Home sales
Buyers in competitive markets like Houghton and Juanita ask us to check suspicious stains before they waive contingencies.
Post-repair checks
Homeowners in Kingsgate and Rose Hill call us to confirm walls are truly dry before closing them up.
Brands

Leak sources we often document

These appliances and fixtures show up again and again as the source in our reports.

Independent restoration company. Not affiliated with these manufacturers.

Service areas

Water damage inspection near you

Same day inspections across Kirkland and these nearby cities.

FAQs

Water damage inspection questions

What does a water damage inspection include?

A visual check, moisture readings in a grid around the damage, thermal imaging, photos, and a written report with a moisture map and recommended next steps.

Can a home inspector find water damage?

Home inspectors look for signs of water damage and may use a moisture meter. A water damage inspection goes deeper, mapping exactly how far moisture spread and what needs to happen next.

How do you know if walls are dry after a leak?

We compare readings from the wet wall to the same material in a dry area of your home. When they match, the wall is dry. Touch alone is not reliable.

Do I need an inspection for my insurance claim?

It is not always required, but a detailed report with photos and readings makes your claim clearer and can prevent disputes about what was damaged.

How long does an inspection take?

Most inspections take one to two hours on site. The written report usually follows within a day or two.

Will you try to sell me repairs?

Our job is an honest assessment. If drying is enough, the report says so. If you want us to do the work, we are happy to, but the report stands on its own.

Available 24 hours

Know exactly what got wet

Call (425) 592-3603 to book a same day water damage inspection in Kirkland. Clear readings, clear photos, clear next steps. Learn more on our homepage.

Open 24 hours, 7 days a week: (425) 592-3603

Call now