Crews on call now, 24 hours a day

Water Damaged Drywall Repair in Kirkland, WA: Same Day Estimates

Water-stained, swollen or crumbling drywall is the most visible reminder of a leak. Our drywall water damage repair team removes what cannot be saved with clean, straight flood cuts, confirms the studs and insulation behind are dry, then hangs new drywall and matches your texture and paint so the repair disappears. We offer same day estimates across Kirkland, WA, and if the wall is still wet, our 24 hour emergency crew starts with drying.

Call (425) 592-3603 Get a drywall estimate

Flood cuts and patches
Dry before we close
Texture and paint match
Same day estimates

Wall with a flood cut line, dry studs and a new drywall panel being textured

Dry first,
then rebuild

Save or replace?

When wet drywall can stay, and when it has to go

Drywall is paper over gypsum. It can handle a little clean water but not much more.

When wet drywall can stay, and when it has to go
What you see	Usually	Why
Small stain, firm to the touch, clean water	Dry in place, then prime and paint	The core is still solid
Soft, swollen or crumbling	Replace	The gypsum core has broken down
Sagging ceiling drywall	Replace	It has lost strength and can fall
Touched by sewage or outside flood water	Replace	It absorbs contamination and cannot be cleaned
Visible mold on the surface or behind	Replace	Mold grows into the paper facing
Wet insulation behind it	Open the wall	Insulation holds water against the studs

Our repair standards

What makes a drywall repair look invisible

Straight flood cuts

We cut in a clean, level line, often at 2 or 4 feet, so new panels fit snugly and seams are easy to hide.

Dry before closing

We read moisture in the studs and plates. Walls are only closed when they are dry, so mold cannot start inside.

Right board for the room

Bathrooms, laundry rooms and basements get moisture- and mold-resistant drywall.

Smooth, level finish

Tape, multiple coats of compound and sanding blend new drywall into the old.

Texture matching

Smooth, orange peel, knockdown or hand texture, matched to your existing walls.

Stain-blocking primer

Primer seals stains and new compound so the paint looks even.

Timing

Why we do not rush to close your walls

It is tempting to patch the wall as soon as the water is gone. But drywall over damp studs is how mold starts growing where nobody can see it.

Drying comes first

We dry the studs, sill plates and insulation cavity with structural drying equipment and confirm with moisture readings. Most walls are ready within a few days.

Insulation gets replaced

Wet fiberglass insulation sags and loses its R-value. On exterior walls, we replace it before new drywall goes up.

Hidden mold check

With the wall open, we look at the back of the old drywall and the studs. If we find mold, our mold remediation team handles it before rebuilding.

Then the repair moves fast

Hanging, taping, texture and paint usually take two to four working days, depending on how many coats of compound need to dry.

Our process

How we repair water damaged drywall

Inspect and measure
We map moisture to find exactly how much drywall is wet, not just stained.
Protect the room
Floors and furniture are covered. Dust control goes up.
Cut and remove
Clean flood cuts remove damaged drywall and wet insulation.
Dry and verify
Studs and plates are dried and checked with moisture meters.
Hang, tape and finish
New drywall, tape and compound, sanded smooth.
Texture, prime and paint
Matched texture, stain-blocking primer and paint to finish the job.

Kirkland walls

Drywall we repair across Kirkland

Basement walls

Daylight basements in Finn Hill often need flood cuts after seepage. See flooded basement cleanup.

Bathrooms and laundries

Upstairs baths in Kingsgate and Totem Lake often leak into the walls and ceilings below.

Textured older homes

Mid-century homes in Market and Rose Hill often have hand textures we match by eye.

Brands

Common sources of wet drywall

Leaks from these appliances and fixtures are behind many of the walls we repair.

View all 25 brands

Independent restoration company. Not affiliated with these manufacturers.

Service areas

Drywall repair near you

Fast drywall repair scheduling across Kirkland and nearby cities.

View all service areas

Related services

Services that come before or after drywall repair

View all 25 services

Helpful guides

Guides about drywall water damage repair

Read all water damage guides

FAQs

Drywall repair questions

Can wet drywall be saved?

Sometimes. If it got wet with clean water, stayed firm, and dries quickly, it can often be dried in place, primed and painted. Soft, swollen, moldy or contaminated drywall should be replaced.

How high should a flood cut be?

It depends on how high water wicked up. Common cuts are 2 feet or 4 feet, which line up with half or full sheets of drywall. We cut above the highest wet reading.

How long after water damage can drywall be repaired?

Once the studs and framing are dry, usually a few days after drying starts. We confirm with moisture readings before closing the wall.

Can you match my wall texture?

Yes. We match smooth, orange peel, knockdown and most hand textures. For the most even look, we sometimes texture and paint a full wall section.

Will you paint the whole wall or just the patch?

Paint usually looks best when a full wall is painted corner to corner. Spot painting can show. We will explain the options and costs.

Does insurance cover drywall repair?

If the water damage is covered, the repair of damaged drywall, insulation and paint is usually part of the claim. We provide itemized estimates in the format most insurers use.

Read our water damage blog Ask us a question

Available 24 hours

Get your walls back to normal

Call (425) 592-3603 for a same day drywall repair estimate in Kirkland. Still wet? Our 24 hour team starts with drying. Learn more on our homepage.

Call (425) 592-3603 Contact us About our team

Open 24 hours, 7 days a week: (425) 592-3603

Call now