Emergency water damage help, 24 hours a day

Kirkland and the EastsideOpen 24/7/365(425) 592-3603

Crews on call now, 24 hours a day

Kenmore Washer Leak Cleanup in Kirkland, WA: Same Day Help

Kenmore washers last a long time, and plenty of them are still running in Kirkland garages, basements and rental homes. But older machines often still have their original rubber hoses, worn seals and tired valves. When a Kenmore finally leaks, our emergency Kenmore washer leak cleanup crews answer 24 hours a day and arrive the same day across Kirkland, WA to remove the water and dry everything it reached.

Call (425) 592-3603Get Kenmore leak cleanup
  • Older and newer models
  • Who made it? We explain
  • Same day crews
  • Answered 24/7

Independent restoration company. Not affiliated with, endorsed by or an authorized service provider for Kenmore or Sears. We clean up water damage; we do not repair washers.

Older Kenmore top-load washer in a garage leaking from cracked rubber hoses
Old hoses fail.
We dry the damage
Who made your Kenmore?

Kenmore model numbers tell you the real maker

Kenmore products were built by other manufacturers. The first three digits of the model number usually tell you which one. That helps your repair tech find parts.

Kenmore model numbers tell you the real maker
Model number starts withUsually made byRelated brand page
110WhirlpoolWhirlpool leaks
796LGLG leaks
417Electrolux (Frigidaire)Frigidaire
Other prefixesOther makersAsk your appliance tech

Find the tag: On top-load Kenmores, look under the lid or on the back. On front-loaders, check inside the door frame. Snap a photo for your repair tech and insurer.

Older washer problems

Why older Kenmore washers start leaking

Original rubber hoses

Hoses harden and crack after years. A burst hose sprays water until the faucet is shut.

Worn inlet valve

Old valves may not shut off fully, overfilling the tub.

Tub seal and bearings

On older top-loaders, a worn seal leaks during spin.

Drain pump

Pumps crack or loosen and leak while draining.

Rusted parts

Rust on the cabinet or tub can mean water has been leaking for a while.

Hard-to-find parts

Some older parts are harder to find, so repairs can take longer.

Garages, basements and rentals

Where older Kenmore leaks hide

Older washers often end up in places people do not check every day: the garage, a basement corner, or a rental property.

Garage laundry

Water runs across the slab and under the door into the house. Drywall at the base of the shared wall soaks it up. We check the wall and the room on the other side.

Basement laundry

In daylight basements, a leak can soak carpet in the next room or reach a finished basement space.

Rental homes

Tenants may not notice slow drips. Landlords call us when a tenant reports soft flooring or a musty smell. We document everything for both sides.

Repair or replace the washer?

That is a question for your appliance tech. Many people replace a very old washer after a leak. Either way, the water damage should be dried right away with structural drying.

Our cleanup

How we handle a Kenmore washer leak

  1. Shut off and secure

    Faucets off, washer unplugged, area safe.

  2. Extract water

    Garage slab, basement floor or laundry room extracted.

  3. Check nearby walls

    Moisture readings at shared walls and next rooms.

  4. Remove what cannot dry

    Swollen baseboards or soaked pad removed.

  5. Dry and monitor

    Daily readings until dry.

  6. Repair

    Drywall, baseboard and flooring restored.

Kirkland homes

Older washers we see across Kirkland

Rentals
Rental homes and ADUs in Market and Juanita often keep washers longer.
Basements
Daylight basements in Bridle Trails often hold the laundry next to living space.
Prevention

Keep an older Kenmore from flooding your home

  • Replace original rubber hoses with braided steel now.

  • Check behind the washer for drips and rust every few months.

  • Turn off the faucets when the washer is not in use.

  • Put a leak sensor on the floor beside the washer.

  • Keep the drain hose secure in the standpipe.

  • Plan to replace very old machines before they fail.

Other washer brands

Washer brands besides Kenmore we clean up after

View all 25 brands

Independent restoration company. Not affiliated with these manufacturers.

Service areas

Kenmore washer leak cleanup near you

Same day cleanup across Kirkland and nearby cities.

View all service areas
Related services

Services for Kenmore washer leaks

View all 25 services
Helpful guides

Guides for Kenmore owners

Read all water damage guides
FAQs

Kenmore washer leak questions

Who makes Kenmore washers?

Kenmore products were made by other manufacturers. The first three digits of the model number usually tell you: 110 often means Whirlpool, 796 means LG, and 417 means Electrolux or Frigidaire.

How old is my Kenmore washer?

The serial number on the tag can show the year it was built. Online lookup tools and appliance techs can help decode it.

Why is my old Kenmore suddenly leaking?

Older hoses, valves, seals and pumps wear out. Rubber hoses in particular get brittle and can split without warning.

Should I repair or replace an old washer after a leak?

Ask an appliance technician. Many people replace very old washers after a leak. Either way, dry the water damage right away.

Is the water dangerous?

Clean fill water is not. Drain water is gray water, so areas it soaked should be cleaned and treated.

Do you repair Kenmore washers?

No. We clean up and repair water damage. An appliance repair company fixes or replaces the washer.

Read our water damage blogAsk us a question
Available 24 hours

Old Kenmore finally leaked? We will dry it today.

Call (425) 592-3603 for 24 hour Kenmore washer leak cleanup in Kirkland. See all brands we cover or our homepage.

Call (425) 592-3603Contact usAbout our team

Open 24 hours, 7 days a week: (425) 592-3603

Call now