Emergency water damage help, 24 hours a day

Kirkland and the EastsideOpen 24/7/365(425) 592-3603

Crews on call now, 24 hours a day

Uponor PEX Leak Cleanup in Kirkland, WA: 24 Hour Help

Uponor PEX is one of the most common water pipe systems in newer Kirkland homes and repiped older ones. PEX tubing is flexible and tough, so most leaks happen at fittings, at the manifold, or where something damaged the line, like a nail, a rodent or sunlight. Those leaks are usually hidden in a crawl space, wall or ceiling. Our team finds them, dries the damage and documents it. We answer 24 hours a day with same day service across Kirkland, WA.

  • PEX lines and fittings
  • Hidden leak detection
  • Crawl space drying
  • Same day crews

Independent restoration company. Not affiliated with, endorsed by or an authorized service provider for Uponor or GF. We clean up water damage; we do not install or repair plumbing.

Uponor PEX manifold with a leaking fitting and lines running into a crawl space
PEX leaks hide.
We find them
Why PEX leaks

The real causes of PEX leaks

Fitting installation

Expansion fittings must be expanded and seated correctly. A poor connection can seep for months.

Manifold connections

Home run systems have many connections in one place. One loose port leaks into the wall below.

Nails and screws

A picture hook or cabinet screw can puncture PEX inside a wall.

Rodent damage

Rats and mice in crawl spaces and attics sometimes chew plastic water lines.

Sunlight (UV)

PEX left exposed to sunlight before or after install can weaken.

Freezing at fittings

PEX resists splitting better than copper, but fittings and valves can still fail in a hard freeze.

Where to look

Where Uponor PEX leaks show up in Kirkland homes

Where Uponor PEX leaks show up in Kirkland homes
Where the line runsHow the leak showsService that helps
Crawl spaceMusty smell, wet vapor barrier, soft floorsCrawl space water damage
Inside wallsBubbling paint, stained baseboardsHidden leak detection
CeilingsBrown stains below bathroomsCeiling water damage
Manifold closetWater at the base of the closetStructural drying
Attic (rare here)Ceiling stains on the top floorBurst pipe cleanup
Finding the leak

How we find a PEX leak without tearing everything out

PEX runs in long, continuous lines from the manifold to each fixture, so a leak can be far from where water shows up.

Start at the manifold

We check every connection at the manifold first. Many homes label each line, which helps us narrow it down.

Isolate lines

With your plumber, individual lines can be shut off one at a time while we watch the water meter or moisture readings.

Thermal imaging and meters

Thermal cameras show wet patterns in walls and ceilings. In crawl spaces, we follow the lines and look for wet barrier and insulation.

Then we dry

Once the plumber repairs the line, we dry the wall, ceiling or crawl space and replace damaged insulation. See burst pipe water damage for sudden failures.

Our process

How we handle a PEX leak

  1. Locate

    Manifold check, line isolation, thermal imaging.

  2. Stop the water

    Line or main shut off; plumber repairs the fitting or line.

  3. Measure the spread

    Readings in walls, floors, ceilings or crawl space.

  4. Remove wet materials

    Insulation, vapor barrier or drywall as needed.

  5. Dry and verify

    Equipment runs until readings hit the dry goal.

  6. Restore

    Insulation, barrier, drywall and paint.

Kirkland homes

PEX homes across Kirkland

Repiped ramblers
Many homes in Rose Hill and Kingsgate replaced old pipes with PEX run through the crawl space.
New construction
Homes and townhomes in Totem Lake and Juanita often use PEX manifolds.
Related fixture brands

Fixtures connected to your PEX system

Independent restoration company. Not affiliated with these manufacturers.

Service areas

PEX leak cleanup near you

Same day leak detection and drying across Kirkland and nearby cities.

FAQs

Uponor PEX leak questions

Does PEX pipe leak?

PEX tubing itself is durable. Most leaks happen at fittings, manifold connections, or where the tubing was damaged by nails, rodents or sunlight.

What causes PEX fittings to leak?

Common causes include fittings that were not expanded or seated correctly, damaged rings, or stress on the line. A licensed plumber can repair or replace the fitting.

Can rodents chew through PEX?

Yes, it happens, especially in crawl spaces and attics with rodent activity. Look for bite marks near leaks.

Does PEX burst when it freezes?

PEX is more flexible than copper and often survives freezing, but fittings, valves and connected fixtures can still fail.

How do you find a PEX leak inside a wall?

We combine manifold checks, line isolation, thermal imaging and moisture meters to locate it, then open only a small area if needed.

Do you repair PEX?

No. A licensed plumber repairs the line. We find the leak and repair the water damage.

Available 24 hours

PEX leak hiding somewhere? We will find it.

Call (425) 592-3603 for 24 hour PEX leak detection and cleanup in Kirkland. See all brands we cover or our homepage.

Open 24 hours, 7 days a week: (425) 592-3603

Call now